Search

ONE word searches yield better results than multiple word searches.

Browse Categories
Browse by Manufacturer
Price Ranges
Search Shopping Lists

Enter the name of your wishlist recipient here to access their wishlist.

<< Previous in NCE PowerHouse Pro Starter DCC System Next in NCE PowerHouse Pro Starter DCC System >>

NCE 524007 (PH-10R) Power House Pro 10 Amp Starter System with Radio

FDT Low Price: $999.95
Sale Price: $799.96
You Save: $199.99 (20 %)
Item Number: NCE00000007
Manufacturer: NCE
Manufacturer Part No: 7




Bookmark and Share
on sale
The Power Pro 10-R is a radio equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and tethered cabs can be used simultaneously.
New Page 1

Contents of the 10 Amp PH-10 System:
CS02 Command Station
PB110A Booster
Pro Cab
Seven foot coiled cable
Twelve inch, four wire flat cable
Seven foot, four wire flat cable
UTP cab bus panel
Seven foot, six wire flat cable for the UTP panel
Power Pro system reference manual
We recommend that you follow the instructions below to connect your
system to a small test track first. After your system is checked out
completely and known to be working then consider the final installation
locations for components and connections to the track.

ProCab Wireless :

Features:
True two way wireless capability to your ProCab
All features of your ProCab are available without plugging in
Uses ANY battery chemistry: Alkaline, NiCad, NiMH, Lithium, Lead Acid
40+ hours of operation (typical) with Alkaline batteries
Automatic switchover to bus power when plugged in
Graceful degradation of operation when approaching maximum range

ProCab Wireless Supplement :

Features:
True two way wireless capability to your ProCab
All features of your ProCab are available without plugging in
Uses ANY battery chemistry: Alkaline, NiCad, NiMH, Lithium, Lead Acid
40+ hours of operation (typical) with Alkaline batteries
Automatic switchover to bus power when plugged in
Graceful degradation of operation when approaching maximum range

BE CAREFUL
The maximum input voltage to your PH-10 or PH-10R is 22 Volts
AC. Voltages higher than 22 Volts AC will ultimately destroy your booster
resulting in an expensive repair charge.
We recommend our 18V AC, 10 Amp transformer (P.N. 524-241,
"Brutus"). If you are using a different transformer be sure to measure the
actual no load voltage before connecting it to your system.

You May Also Like:

NCE 241 BRUTUS 10amp TRANSFORMER/PS
FDT Low Price: $219.95
Sale Price: $175.96
You Save: $43.99 (20 %)
NCE 241 BRUTUS 10amp TRANSFORMER/PS
A full 10 amps of AC power specifically for NCE's PH10 systems.
on sale

Product Reviews

(0 Ratings, 0 Reviews)

Mailing Lists
Our best deals & tips in your inbox!
Shopping Cart
Your cart is empty.